Pneumatic and Manual Clipping Machines for Sealing Packaging
Uniclip clipping machines seal plastic bags, produce nets, sausage casings and water-filled bags with an aluminum clip, with no tape or knots. Four lines: the manual MM for lower volumes, the pneumatic M and MC for production lines running up to 40 cycles per minute, and the double-rail MD-200. Built in São Paulo for 32 years, sized to your packaging and tested before purchase.
MM Line Manual Clippers
Uniclip manual clipping machines are compact, lightweight, and easy to use, perfect for periodic or low-volume operations. Featuring an ergonomic and durable design, they secure a precise and reliable seal for sacks, plastics, or assorted packaging formats.
Ideal for small and medium producers, they operate independently of compressed air or electricity. Supports production lines of up to 2,000 packages daily.
Clips: R-10
Clips: S-524, S-528
Clips: S-625, S-628, S-632, S-638
Clips: S-735, S-740, S-744, S-747
Pneumatic Clipping Machines (M Line)
Uniclip's M Line (models M-1 to M-4) guarantees ultimate performance for the pneumatic closure of industrial packaging. Tailored for sausages, poultry, cheeses, produce, and other food items, these clippers process up to 40 packages per minute.
With automatic pneumatic actuation, operators complete packaging with ease and minimal physical strain, ensuring superior safety and an uninterrupted production flow.
Clips: R-10
Clips: S-524, S-528
Clips: S-625, S-628, S-632, S-638
Clips: S-735, S-740, S-744, S-747
Pneumatic Clippers with Mandible (MC Line)
Engineered for demanding requirements in meat processing, charcuterie, salami, and cheese manufacturing, Uniclip's MC Line (models MC-3 and MC-4) integrates powerful pneumatic action with a pre-clamping jaw to deliver airtight, tamper-evident sealing on heavy and dense packaging.
Calibrated closing capacity for industrial efficiency: closes packages up to 60 mm in diameter when operated in-line with a stuffer/filler, and up to 100 mm in diameter in manual closing operations (depending on package weight and casing specifications). Heavy-duty construction in anodized aluminum, sanitary stainless steel, and anti-corrosion components ensuring long-term reliability and compliance with hygiene standards.
Clips: S-625, S-628, S-632, S-638
Clips: S-735, S-740, S-744, S-747
MD-200 Clipper
The MD-200 is a semi-automatic pneumatic clipping machine featuring a dual-track system (continuous feed). It is crafted for the fast and reliable closure of meshes and nettings.
An excellent choice for produce farmers packaging oranges, potatoes, onions, and other items sold in nets. Ensures a tamper-evident seal combined with high throughput rates.
Clips: S-524, S-528
Specifications by clipping machine line
The same data we use to size the machine to your packaging. The model within each line sets the clip gauge and the weight it handles.
| Line | Drive | Air pressure | Cadence | Compatible clips | Package up to | Best for |
|---|---|---|---|---|---|---|
| MM (MM-1 to MM-4) | Manual lever with tempered hammer | No air needed | Up to 2,000 packages/day | R-10 (MM-1), S-524 and S-528 (MM-2), 600 series (MM-3), 700 series (MM-4) | 2 to 8 kg | Lower volumes, benchtop, water-filled bags (live fish), small runs |
| M (M-1 to M-4) | Benchtop pneumatic, foot pedal | Up to 6 bar | Up to 40 cycles/min | R-10 (M-1), S-524 and S-528 (M-2), 600 series (M-3), 700 series (M-4) | 2 to 8 kg | Meat plants, whole poultry, cuts, cheese and bagged goods on continuous lines |
| MC (MC-3 and MC-4) | Pneumatic jaw clipper, couples to stuffers | Up to 6 bar | Up to 40 cycles/min | 600 series (MC-3), 700 series (MC-4) | Ø 60 mm inline / Ø 100 mm bench | Sausages, salami, cheese and any tubular packaging |
| MD-200 | Semi-automatic pneumatic, double rail with built-in knife | Pneumatic | 15 to 30 bags/min (real cadence) | S-524, S-528 and R-10 (no 600 series) | Nets of 2 to 5 kg | Produce nets: garlic, potatoes, onions and citrus |
Swipe sideways to see all columns
Pressure above 6 bar overloads the pneumatic lines. For potato bales that need the 600 series, the right machine is the M line, not the MD-200.
Which clipping machine for each package
Start from what you pack. The weight sets the clip, and the clip sets the model.
Plastic bag
Whole poultry, vacuum cuts, offal, cheese and bagged goods. The bag is gathered at the neck and receives an omega clip.
M line (M-3 or M-4) · MM line for low volume
Produce net
Garlic, potatoes, onions and citrus in tubular nets. The MD-200 applies two clips and cuts the net in the same cycle.
MD-200 with S-524/S-528 · M line for bales needing the 600 series
Casing and tubular packaging
Sausage, salami and cheese in casings or tubes. The jaw closes diameters up to 60 mm coupled to the stuffer.
MC line (MC-3 or MC-4)
Water and oxygen bag
Live fish, fingerlings and ornamentals. The clip seals the inflated bag without piercing it or losing pressure.
MM line or M line with 600/700 series
Watch it in Action
Watch our clippers deliver precise and swift closures on a variety of packaging materials.
Grampeadeira Pneumática embalando água
Grampeadeira Pneumática com Mandíbula Linha MC
Grampeadeira Pneumática Linha M
Why Opt for Uniclip Clippers?
FAQ: Clipping Machines and Clippers
What is the difference between manual and pneumatic clipping machines?
The manual clipping machine (MM Line) operates mechanically via a lever without electricity or compressed air, sealing up to 2,000 packages per day. The pneumatic clipping machine (M Line and MC Line) connects to an air compressor, features an ergonomic foot pedal, and reaches up to 40 cycles per minute in continuous production lines.
What air pressure is recommended for Uniclip pneumatic clippers?
Up to 6 kg (kgf/cm² / bar). This is the calibrated working pressure for the M, MC and MD-200 lines. Running above this limit does not increase output and accelerates wear on the hammer, pneumatic cylinder and dies.
How can I request a quote or demonstration of Uniclip clippers?
As a manufacturer, Uniclip serves meat plants, produce packers and industrial clients directly across Brazil and Latin America. Request a custom quote via WhatsApp at +55 (11) 91295-3325 or email mecatec@mecatec.com.br. You can send samples of your packaging for testing at our factory before purchasing.
Does Uniclip provide spare parts and technical support?
Yes. Uniclip keeps a permanent stock in Brazil of wear parts (hammers, dies, blades, springs and pneumatic cylinders) with fast dispatch, plus direct technical support and operator training. This is our Zero Downtime commitment.
Need a clipper?
Contact our consultants to receive a recommendation for the ideal model for your application.
Get in Touch via WhatsApp